Trustpilot
Temperature control by rotary knob
After unlocking, set the temperature, and the screen will display the set temperature. After setting the temperature, the temperature number stops flashing, the heating rod starts working, and the screen displays the current water temperature, which can reach up to 93.2.
Temperature control by pressing a button
The difference between button temperature control and rotary temperature control is that one can increase by 0.1℉ and the other by 1℉. Rotary temperature control is recommended, which has no noise and is more accurate and faster in temperature control.
standby mode
When the water temperature is less than 1°F from the set temperature or floating range, the heater enters standby mode, the power area shows 0, and the heating rod does not heat.
Full Power Mode
If the water temperature is lower than the set temperature, and the temperature difference between the water temperature and the set temperature exceeds 1°F, the heater will heat at full power, and the power zone power will change in real time.
