Trustpilot
Ready to install filter kit Effective 3-Stage Filtration
Filters come with: 1 lbs ceramic bio balls for biological filtration – grows beneficial bactria and eliminates ammonia and nitrite, 4 floss pads for mechanical filtration – removes fine to large particles. Triple chamber media container allows for customizable media.
Fish Waste Collector
The transparent tube is build in a stainless steel rotary drum that collcets and sieves out leaves and other large particles. Colorful beads rubs against the rotary drum to prevent clog up. Easy to assemble and clean.
Easy Water Change
Fish tank filter is equipped with a drainage outlet, allowing to insert water hose or a small bucket to quickly and easily drain out dirty water. Use a pair of pincers to turn the knob horizontally before drain. NOTICE: Hose is not included, recommend 1/2’’ ID hose.
3 Water Patterns Available
Comes with spray bar, directional spout which can agitate the surface of your aquarium, and an adjustable air pipe that pumps oxygen bubbles into the water, thus improve fish's healthy. Two suction cups to help spray bar stay in place.
Adjustable Water Flow
No matter spray bar or directional spout, the flow rate is adjustable by turning the knob of the outlet tube to suit your aquarium's need. You can also adjust it's direction to 180 degree.
Oil Skimmer
The oil skimmer removes surface floating film with specks quickly. Turn the knob below skimmer to adjust water intake flow. Wrapping a bit of mesh net 2 layers around the top and securing with a rubber band is absolutely 100% shrimp proof. IMPORTANT: it won't spin.
What's Included
Set include --1 x air pipe, 1 x spray bar, 1 x directional spout, 1 x surface skimmer, 4 x floss pads, 1 lbs ceramic balls, 1 x filter, 1 set of inlet and outlet assembly, 2 x mounting clips, 2 x suction cups.
Telescopic Tube
The 9.8 inches long telescopic tube for varying aquarium heights. There are telescopic tube and surface skimmer for your option.
Intake Strainer
Intake strainer provides modest suction to vacuum out gravel build-ups, debris into the filter. Suction cup helps it keep on place.
Priming Required
Use a pair of pincers to turn the lid from lock to unlock and lift it. Fill the filter with water until it is full. Remove inlet tube before priming.
Mounting Clips
2 mounting clips is adjustable for rimless tank ONLY up to 12mm thick. Pull up the tiny piece on the top of hanging clips and push to adjust width.
